Faithfull Measuring & Marking Tools
Filter
![Close](/images/close.png)
Faithfull - Aluminium Triangle Scale Rule 300mm
This Faithfull Aluminium Triangular Scale Rule is graduated with six different scales for precision drawing. (1:20, 1:25, 1:50, 1:75, 1:100, and 1:125). The graduations are clear and easy to read.The unique triangular profile keeps fingers well away from any knife edge when used for cutting or scoring card etc. Specification: Length: 300mm (12 in).
£3.59 inc VAT
Faithfull - Black Pencil Marking Refill Pack, 6 Piece
The Faithfull Black Pencil Marking Refills for the FAICPLR Automatic Long Reach Pencil. They can be used to easily mark any surface whether it’s wet or dry and if needed the markings can be wiped clean from shiny surfaces with a damp cloth. Supplied in a sliding storage case to protect the refills from breakage.
£3.10 inc VAT
Faithfull - Black Steel Roofing Square
1 x Faithfull Black Steel Roofing Square 400 x 600mm (16 x 24in)
from £7.50 inc VAT
Faithfull - Combination Square Set 300mm (12in)
The Faithfull FAICS300SET combination square set incorporates engraved stainless steel rulers with strong metal sliding bodies. The handle features a scriber and a spirit level. This measuring tool is very versatile with at least 10 different uses including: 300mm measure with metric and imperial scale, 90° inside square, 90° outside square, 135° inside square, 45° inside square, horizontal...
£25.80 inc VAT
Faithfull - Depth Gauge with Protractor 150mm (6in)
The Faithfull Depth Gauge with Protractor is a versatile tool allowing the angle and depth to be measured simultaneously. The protractor features deep etched graduations 0 - 180° in opposite directions permitting the reading of both the direct and supplementary angles.The rule is graduated in both imperial and metric dimensions up to 150mm (6in) and a knurled thumb nut allows the rule to be locked...
£13.79 inc VAT
Faithfull - Digital Caliper
The Faithfull Digital Calipers are made from hardened stainless steel, this electronic digital caliper provides precision readings through a clear liquid crystal display. Its many features include a fine adjustment roller which allows precise measurements to be taken quickly and easily. The digital section button enables readings to be displayed in either metric or imperial format. The four-way measurement...
£46.60 inc VAT
Faithfull - Dipping Tape Measure with Weight 30m/100ft
This Faithfull high quality 30 metre dipping tape is ideal for accurately measuring tank contents. The carbon steel blade is marked with easy read graduations in millimetres and figured in centimetres on one side and feet and inches in 1⁄16 inch graduations on the other. The tape has a quick release swivel connector and is supplied complete with an approx. 278g graduated brass weight. The...
£59.44 inc VAT
Faithfull - Double-Ended Scriber 186mm (7.1/3in)
The Faithfull Double-Ended Scriber has a knurled body to provide a positive grip. The two sharp ground points are heat-treated to retain their edge. One point is set at right angle increasing flexibility for marking and scoring. Specification: Length: 186mm (7.1/3in).
£3.84 inc VAT
Faithfull - Engineer's Square
Size: 225mm (9in) External size: 262 x 160mmInternal size: 235 x 129mmStock thickness: 18mmBlade thickness: 2mm
from £10.97 inc VAT
Faithfull - Engineer's Marking & Measuring Set, 6 Piece
This compact set of engineering tools contains 6 essential marking and measuring tools. Supplied in a wooden storage case, the set contains the following tools: Faithfull FAIESMEASURE Engineers Marking & Measuring Set 6 Piece comprises:3 x Precision Stainless Steel Squares 50mm (2in), 100mm (4in), 150mm (6in), accurate to BS939 Grade B standard.1 x Steel Centre Finder 38mm capacity.1 x Stainless...
£64.46 inc VAT
Faithfull - Engineer's Squares Set, 4 Piece
Faithfull Engineer's Squares Set supplied in a wooden storage case. Carefully crafted from high-quality tool steel, these squares are accurate to BS939 Grade B standard. The stock and blade are precision ground to ensure straightness and accuracy, and the spring steel blade is hardened and tempered for increased durability. Sizes: 50, 75, 100, 150mm
£48.13 inc VAT
Faithfull - Feeler Gauge Metric
The Faithfull Feeler Gauge contains 20 blades that cover the sizes from 0.05mm to 1.00mm. The blades are 100mm long and made from hardened, tempered and polished steel. A knurled thumbscrew allows the blades to be locked in place. Feeler gauges are used to measure the size of small gaps between 2 objects that are in close proximity. Ideal for setting gaps between components in vehicle engines such...
£7.93 inc VAT
Faithfull - Fibre Tip Marker Pen Black (Pack 2)
1 x Pack of 2 Faithfull Fibre Tip Marker Pens Black
£2.98 inc VAT
Faithfull - Fully Enclosed ABS Fibreglass Long Tape 30m/100ft (Width 15mm)
The Faithfull Fully Enclosed Fibreglass 30m / 100ft Long Tape features a 15mm wide blade clearly marked in both metric and imperial measurements. The fibreglass blade is resistant to stretching, impervious to moisture and resistant to scuffs and fitted with an ABS end loop. The large clear measurement increments are easy to read in most conditions and the tape is also easy to wipe clean after use....
£14.22 inc VAT
Faithfull - Jenny Caliper 150mm (6in)
The Faithfull Fixed joint Jenny Calipers are specifically designed to locate the centre of a round or square section of steel. The leg that holds the adjustable point is offset with the locating lug incorporated in the straight leg. Also known as Hermaphrodite calipers. Range: 150mm (6in).
£8.34 inc VAT
Faithfull - Marking Gauge
This Faithfull Marking Gauge is made from the finest hardwood, and enhanced with brass facing plates and fittings. A nylon friction pad is fitted under the knurled brass thumbscrew to reduce wear to the stem and to ensure secure, smooth and accurate setting of the gauge. Used to mark parallel lines either with or across the grain.
£20.15 inc VAT
Faithfull - Mortice Gauge - Slide Adjustment
This Faithfull Mortice Gauge is made from the finest hardwood, and enhanced with brass facing plates and fittings. A nylon friction pad is fitted under the knurled brass thumbscrew to reduce wear to the stem and to ensure secure, smooth and accurate setting of the gauge. Used for laying out mortices and for marking out with the grain. The second pin is used for mortice work can be accurately set by...
£27.36 inc VAT
Faithfull - Prestige Adjustable Quick Roofing Square
1 x Faithfull Prestige Adjustable Quick Roofing Square 180mm (7in).
from £22.58 inc VAT
Faithfull - Prestige Centre Finder Gauge
With a measuring capacity of 140mm, this tool can be used on objects with a diameter or width of up to 240mm. Specification: Length: 150mmMeasuring Capacity: 140mm
from £22.01 inc VAT
Faithfull - Prestige Combination Square Set 300mm (12in)
The Faithfull Prestige Combination Square Set is manufactured from aluminium using computer numerical controlled (CNC) machines. The black anodised finish offers enhanced corrosion protection and the laser-etched scales give outstanding measurement accuracy. This square set includes a protractor head for marking and measuring angles, clearly graduated from 0-180° in both directions. A centre finder...
£62.51 inc VAT
Faithfull - Prestige Combination Square Twin Pack 150mm (6in) & 300mm (12in)
This Faithfull Prestige Combination Square Twin Pack contains: 1 x 150mm (6in) Prestige Combination Square1 x 300mm (12in) Prestige Combination Square
£33.41 inc VAT
Faithfull - Prestige Quick Square Black Aluminium 178mm (7in)
1 x Faithfull Prestige Quick Square Black Aluminium 178mm (7in)
£15.43 inc VAT
Faithfull - Prestige Tri-Scale Engineer Rule Black Aluminium 300mm
This Faithfull Prestige Tri-Scale Engineer Rule has the following specification: Length: 300mm (12in)Scales: 1:20, 1:25, 1:50, 1:75, 1:100, 1:125
£13.31 inc VAT
Faithfull - Quick & Easy Aluminium Roofing Square 180mm (7in)
The Faithfull Quick Roofing Square* also known as a layout or angle square, is designed to provide carpenters with a quick and accurate way to mark out for many building projects. It is widely used when constructing roof rafters.The square is manufactured from aluminium and has imperial graduations marked with degree measurements, which help simplify material layout and timber cutting.The Roofing Square...
£7.62 inc VAT
Faithfull - Screw Pitch Gauge 52 Metric Whitworth
The Faithfull FAIPITCHMW Screw Pitch Gauge 52 Metric Whitworth is a handy gauge which quickly determines the pitch of various screw threads.The high-quality polished tool steel leaves are clearly marked with size and there is a locking device at both ends to securely lock the leaves. Specifications: Number of Leaves: 52.Whitworth Standard 55 Degree Threads.Metric Standard 60 Degree Threads.
£11.64 inc VAT
Faithfull - Screw Pitch Gauge 55 Metric Amer-Nat
The Faithfull FAIPITCHMA Screw Pitch Gauge is a handy gauge which quickly determines the pitch of various screw threads.The high-quality polished tool steel leaves are clearly marked with size and a locking device at both ends to securely lock the leaves. Specifications: Number of Leaves: 55.US National 60 Degree Threads: 4-42 tpi.Metric 60 Degree Threads: 0.25-6.0mm.
£11.64 inc VAT
Faithfull - Trade Tape Measure
Specification: Blade Length: 8m / 26ftBlade Width: 25mmGraduations: Metric and Imperial
from £7.46 inc VAT
Faithfull - Vernier Caliper 150mm (6in)
This Faithfull Vernier Caliper is manufactured from hardened stainless steel with dual reading in Imperial to 0.001in and in Metric to 0.02mm. The universal four-way measurement facility enables reading in external, internal, depth and step modes. The sliding thumblock feature easily allows quick and precise measurements to be taken. The satin finished scales and beam ensure fast, easy and accurate...
£31.15 inc VAT